Engeli
Engeli
Engeli
Engeli
Engeli

Engeli

Historic, solid-looking oak forms the top layer in a contemporary multilayer construction that saves on resources. The floor fulfils all the latest requirements and will retain its shape and dimensions well into the future.

Engeli – Product data

Engeli
Length

2450 – 5000 mm
in steps of 500 mm

Width

approx. 240 – 360 mm
in steps of 40 mm

Thickness

approx. 17 mm (± 0.5 mm)

Top surface

approx. 2.5 mm; glued waterproof and formaldehyde-free.

Construction

Construction: Multilayer with swelling and shrinkage protection
Top layer: oak
Carrier: birch plywood

Surface

Schotten & Hansen pre-finished, permeable surface. Surface treatment with natural oils, resins and waxes. Schotten & Hansen surfaces can be regenerated without sanding or mechanical treatment.

Special features
  • Brandschutz Dfl - S 1

    Fire behaviour classification Dfl - s1 according to EN 14342:2013

  • Chemical resistance

    Chemical resistance according to EN 13442:2023-04, method A+B: predominantly no visible changes

  • Formaldehydemission

    Formaldehyde emission according to EN 14342: Class E1, measured according to EN 717-1

  • Fußbodenheizung

    Underfloor heating: Suitable for hot water or electric underfloor heating. Thermal conductivity λ [W/(m/K)]: Overall structure with oak veneer 0.13. Thermal resistance R [m²K/W]: Overall structure 0.15 (calculated according to EN 14342:2013)

  • VOC emissions

    VOC emissions according to AgBB scheme < 1 mg / m³

  • Reinigung & Pflege

    Easy to clean with Schotten & Hansen care products

  • Recycling

    Schotten & Hansen wood products are recyclable according to the waste wood regulation category A2 and can therefore be reused for the production of wood-based materials.

Short length share (1450 mm, 1950 mm) up to 10 %.

Do you have any questions?
We are happy to advise.